I use all virgin powders from PBTP Columbia Coatings or Eastwood
.
I stock Extreme Chrome from PBTP which is the best chrome powder on the market and nearest to actual chrome then any other powder.

As a service, I will take in your parts, mask them (basic), powder coat them in the color you choose and then return them to you. We can powder coat any part that can withstand 400 degrees without damage. My oven will hold most heads and intake manifolds with no problem. Parts under 26” wide, 20” high and 16” deep fit best, the oven chamber is about 30" wide by 22" tall by 18" deep (Anything larger will not fit in my oven)..

This is a great finish for all parts and would complement any car. Dress up your engine, and make it easier than ever to clean!  When shipping, be sure to package all parts well and insure them for the full value. 

All parts must be completely disassembled and free of grease and oil. An additional charge will apply for the degreasing and stripping of parts. Return times vary from 2 to 4 weeks depending on workload. You will only pay actual shipping costs to ship the item back to you. We accept PayPal, check, and money orders (personal check waits to clear before shipping).

Due to the varied condition of parts and how much work is required in preparation, many parts need to be quoted on an individual basis. The prices shown will give you a good idea as to cost and it includes pre-work such as media blasting and normal preparation of the parts.  For a more accurate quote, please send me an email with a picture and description of the work you want done. 

Send any questions or quote requests to me at powdercoat@optonline.net or call 914-456-6152

At the very bottom of this page are some samples of job's I have done.


All prices are each unless otherwise noted
 

Air Cleaner Set, $40   
Alternator Housings ,$45
Blower Housing, $175.00
Battery Box, $25
Brake Drum, $30.00
Brake Drum Back Plates, $25.00
Brackets (small), $5-$8
Brackets (medium), $9-$15
Brackets (Large), $16-$25
Bell Housings,  $45.00

Control Arms Upper & Lower (must be disassembled), $40
Carburetors-Holly-Body, $90 
Carburetors Bowls, $25 ea
Coil Springs,  $40.00

Disc Brake Rotors (hub only), $25
Disc Brake Back Plates, $25.00
Disc Brake Caliper set, $60.00

 

Exhaust Manifolds (Outside only), $40

 
Fan, $24.00

Heads V6-8 set, $200-$250
Headers-Shorty only,  $80
Headlight Buckets, $20-$25
Hood Hinges (Set, Typical Domestic), $75

Idler Arms, $15
Intake Manifolds  $75

License Plate Frame, $20.00

Master Cylinder (must be disassembled), $25.00

Oil Pan, $60

Pulleys, $15
Power Steering Box, $65.00

Rear End Inspection Cover,  $25.00

Spindles (Masked Races), $50

Tuned Port Injection, $150.00
Timing Chain Cover,  $25.00
Thermostat Housings, $20
Tie Rods (Mask Threads), $25
Timing Cover, $40
Transmission Housing (Manual), $245.00
Transmission Pan, $35.00

Valve Covers-Steel (Special masking extra cost), $45.00
Cast Valve covers (Special masking extra cost), $75

Windshield Wiper Arms, $25

     

 

Motorcycle Parts Price List

All prices are each unless otherwise noted

Parts Single color
Air Cleaner Front $20.00
Air Cleaner Back $20.00
Air Cleaner S&S $20.00
Battery Box Bottom $20.00
Battery Box Side $15.00
Battery Box Strap $10.00
Battery Box Cover $15.00
Belt Guard $30.00
Belt Pully Cover $20.00
Brackets Up To 6" $10.00
Brake Arm $15.00
Brake Pedals $25.00
Brake Pedal Mount $30.00
Brake Rotor, each $40.00
Brake Caliper, 1pc $40.00
Cam Cover $50.00
Clutch Perch $15.00
Coil Bracket $15.00
Coil Cover $15.00
Crash Bars $60.00
Dash/Instrument Cover $20.00
Derby Cover $15.00
Drive Belt Pully, Rear $40.00
Exhaust Shields $20.00
Exhaust Brackets $20.00
Fender Struts $40.00
Foot Pegs, Pr $25.00
Fork Cans $20.00
Fork Tubes $50.00
Hand Levers, Pr $25.00
Handlebar Clamps, Pr $20.00
Handlebar Control Clamps, Pr $20.00
Handlebar Riser, Pr $20.00
Handlebar Switch Housing, each $15.00
Headlight Rim $15.00
Headlight Shell $20.00
Headlight Shroud FL $60.00
Headlight Tin Set, Heritage $80.00
Headlight Visor $15.00
Horn Cover $15.00
Hub $30.00
Inspection Cover $15.00
Kick Stand $20.00
Kick Stand Plate $15.00
Lifter Block, Pr. $40.00
Master Cylinder $35.00
Master Cylinder Cover $10.00
Oil Pump Housing $25.00
Oil Pump Cover $15.00
Oil Tank $45.00
Points Cover $10.00
Primary Cover, FL/FX/XL $65.00
Primary inner $65.00
Push Rod Cover Sets $40.00
Rocker Spacer, Each $20.00
Shift Mount $40.00
Shift Pedal $20.00
Shock Spring Covers, each $25.00
Shock Springs disassembled $25.00
Sprocket / Drum $30.00
Sprocket Cover / Drum Cover $40.00
Starter End Cover $20.00
Starter Housing $25.00
Starter Mounting Bracket $10.00
Swing Arm axle block $5.00
Swing Arm $75.00
Trans, End Cover $30.00
Trans, Mounting Plate $20.00
Trans Relase Arm $10.00
Trans Top Cover $25.00
Turn Signal Bar $25.00
Turn Signal Each $10.00
Turn Signal Visor $10.00
Velocity Stack $20.00
   
Part Samples
 
Chrome Powder coat

 


Chrome Powder coat

 


Chevy Orange

Chrome Powder Coat
 


SBC Valve Covers in Bright Red

                
1969 Camaro Rally Rimsin Argent Silver with Clear,
These had more pits in them then the moon but they came out okay



SBC Valve Covers-
StarLight clear over
Black Cherry


Amplifier cover in
Black Wrinkle


The intake is an old Torker II for a BBC, Super Clear over Argent Silver.  The misc brackets are done in Mirror Black, the alternator bracket had some pitting due to some rust. It needed to have a filler sealer but, that was a free job for a repeat customer and he was fine with it.

  This are fork tubes done in Black Cherry with Starlight Clear. There's two shots, one with a flash and one without to show how starlight clear a little better.

 

This is a set of Harley Davidson Rims done in Chrome powder around the rim edge and small raised area on each spoke, then Black Cherry with a StarLight clear coat. The picture right after me applying the clear coat is a rim without the Starlight clear on it, that's just the Black Cherry.

These parts were coated with PBTP Mirror Blue which is almost an exact match to the Ford light blue

.

 

Swing Arm in PBTP Mirror Black